May 18, 2024

Network System

Une technologie unique

Cisco CCNA Voice Certification Follow Inquiries – IIUC Test

2 min read

Check your information of dial peers, codecs, Phone Manager Convey, ATAs and more. This will help you prepare for the Cisco CCNA Voice IIUC 640-460 examination.

(Answers are at the end )

1) Which of the following is chosen first for an incoming dial peer?

A) Respond to-tackle B) incoming identified as-number C) place-pattern D) pots port E) dial-peer

2) What is demanded to change a G711ulaw phone to G729?

A) Voice Termination methods B) Conferencing resources C) Converter sources D) Transcoding assets E) Gateway resources F) Gatekeeper sources

3) What is the maximum selection of phones are supported on Phone Supervisor Specific?

A) 48 B) 28 C) 240 D) 500 E) 30000 F) 4

4) What protocol requires to be enabled on an ATA if a fax machine is related to the ATA?

A) MGCP B) SCCP C) H323 D) SIP E) QSIG F) Q931

What protocol wants to be enabled on an ATA if an analog phone is connected to the ATA?

A) MGCP B) SCCP C) H323 D) SIP E) QSIG F) Q931

Solutions: 1)B – incoming named-number is the very first choice when matching incoming dial-friends

2)D – Transcoding methods are essential to convert G711ulaw to G729

3)C – the maximum variety of telephones supported on CME is 240 on a 3845 Cisco router (this has transformed recently to 250, but the CCNA Voice class continue to sets this worth at 240)

4)C – H323 demands to be enabled on the ATA if a fax device is linked to the ATA.

5)B – SCCP needs to be enabled on the ATA if an analog phone is connected to the ATA.

Leave a Reply